Florida International University  |  College of Engineering and Computing
George S. Dulikravich, PhD
Research and Technology
Home
About The Department
Academic Programs
Admission Information
Apply Online
Faculty and Staff
Graduate Handbook
Undergraduate Handbook
Request information
Research and Technology
Student Resources

Contact Us
Panthersoft
PantherMail
About The Department

Ibrahim Nur TANSEL
Associate Professor
Wisconsin ‘86
Fall ‘90
tanseli@fiu.edu
(305) 348-3304

 

 

Degrees with Fields, Institution, and Date:

Ph.D. Mechanical Engineering, University of Wisconsin-Madison, May 1986
M.S. Mechanical Engineering, University of Istanbul, Turkey, March 1980
B.S. Mechanical Engineering, University of Istanbul, Turkey, May 1978

Number of Years Service of this Faculty, Date of Original Appointments and Dates of Advancement in Rank:

11 Years
Associate Professor, Florida International University, 1994 - Present
Assistant Professor, Florida International University, 1990-1994

Other Related Experience - Teaching industrial, etc.:

Assistant Professor, Tufts University 1986-1990
Teaching Assistant, University of Wisconsin-Madison, 1984-1986

Consulting, Patents, etc.:

Motorola, Ft. Lauderdale, several times

State in which registered: N/A

Principal Publications (Last five years):

I.N. Tansel, M. E. Trujillo, W.Y. Bao, T. T. Arkan, Acoustic Emission Based Tool Breakage Detector (TBD) for Micro-end-Milling Operations,Int. Journal of Modelling and Simulation, Vol.21, No.1, 2001, pp.10.

N. Tansel, O. Rodriguez, M. Trujillo, E. Paz and W.Li, Micro-End-Milling-I. Wear and Breakage, Int. Jour. of Mach. Tools and Manufacturing, Vol.38, No.12, 1998, pp.1419-1436.

I. N. Tansel, A. Nedbouyan, M. Trujillo, B. Tansel, Micro-End-Milling-II. Extending Tool Life with a Smart Workpiece Holder (SWH), Int. Jour. of Mach. Tools and Manufacturing, Vol.38, No.12, 1998, pp.1437-1448.

N. Tansel, M. Trujillo, A. Nedbouyan, C. Velez, Wei-Yu Bao, T.T. Arkan, B. Tansel, Micro-End-Milling-III. Wear Estimation and Tool Breakage Detection using Acoustic Emission Signals, Int. Jour. of Mach. Tools and Manufacturing, Vol.38, No.12, 1998, pp.1449-1466.

B. Tansel, B. Reyes-Osorno, I.N. Tansel, Comparative Analysis of Fluorescent Lamp Recycling and Disposal Options, The Journal of Solid Waste Technology and Management, Vol.23, No.2, 1998, pp.82-88.

I.N. Tansel, Monitoring micro-drilling operations using neural networks, Key Engineering Materials, v. 138-140, 1998., p. 575-592.

B.Tansel, C. Jordahl, I.N. Tansel, Mapping of Subsurface Contaminant Profiles by Neural Networks, Journal of Civil Engineering and Environmental Systems, Vol.16, 1999, pp.37-50.

I.N. Tansel, W.Y. Bao, T.T. Arkan, B. Tansel, Assessing Underground Contamination Concentration Profiles by Using Neural Networks, Housing Science, Vol.23, No.1, 1999, pp.11-18.

I.N. Tansel, T.T. Arkan, W.Y. Bao, N. Mahendrakar, B. Shisler, D. Smith, M. McCool, Tool Wear Estimation in Micro-machining I – Tool Usage Cutting Force Relationship, Int. Jour. of Mach. Tools and Manufacturing, Vol.40, No.4, 2000, pp.599-608.

I.N. Tansel, T.T. Arkan, W.Y. Bao, N. Mahendrakar, B. Shisler, D. Smith, M. McCool, Tool Wear Estimation in Micro-machining II – Neural Network Based Periodic Inspector for Nonmetals, Int. Jour. of Mach. Tools and Manufacturing, Vol.40, No.4, 2000, pp.609-620.

W.Y. Bao, I.N. Tansel, Modeling Micro-End-Milling Operations--I: Analytical Cutting Force Model, submitted to Int. Jour. of Mach. Tools and Manufacturing, Vol.40, No.15, 2000, pp.2155-2174.

W.Y. Bao, I.N. Tansel, Modeling Micro-End-Milling Operations--II: Tool Run-out, Int. Jour. of Mach. Tools and Manufacturing, Vol.40, No.15, 2000, pp.2175-2192.

W.Y. Bao, I.N. Tansel, Modeling Micro-End-Milling Operations--III: Influence of Tool Wear, Int. Jour. of Mach. Tools and Manufacturing, Vol.40, No.15, 2000, pp.2193-2212.

Membership in Scientific and Professional Societies:

Member of the ASME
Member of the SME

Honors and Awards:

Outstanding Young Manufacturing Engineer Award, SME, 1992
“ Excellence In Teaching Award,” FIU, 1998
“ Excellence In Research Award,” FIU, 1993

Institutional and Professional Services (Last five years):

Member of Faculty Senate Steering Committee
Member of Faculty Senate Research One Committee
Senator of FIU Faculty Senate, 2000-2002

Professional Development Activities (Last Five Years):

Summer Faculty Research Program, Naval Air Warfare Center, Aircraft Division (NAWCAD), July- August 2000
Summer Faculty Research Program, Naval Air Warfare Center, Aircraft Division (NAWCAD), April- June 2000
Air Force/Summer Faculty Fellowship, Wright Patterson AFB, Dayton, OH, July-August 2001

 
 
Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology

The Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology (EAC/ABET) accredits engineering programs on a nationwide basis. Students wishing more information about accreditation should consult their respective departmental office or the Office of the Dean. The following baccalaureate engineering programs in the college are accredited by ABET, Inc., Biomedical Engineering, Civil Engineering, Computer Engineering, Electrical Engineering, Industrial Engineering and Mechanical Engineering.

 
 

copyright © 2008, College of Engineering and Computing | Florida International University, Miami, FL 33174